Part No: A324-AOD angle Wedge 2.875" for A32 phased array probe
Part No: A324
AOD angle Wedge 2.875" (single side scan Wedge) Tube ranger coverable 60.3mm(2.375") - 73.0mm(2.875")
Wedge 55 degree for A32 phased array probe - Designed for azimuthal
scanning from 40 to 70 degree using 55 degree nominal angle,
Stainless steel screw receptacles provide a firm anchoring of probe to wedge
Wedges are available with irrigation, holes for mounting a scanners and carbide pins for wear resistance
Wedges are designed to perform manual or automated scans (scanners)
Wedge 55 degree for A32 phased array probe - Designed for azimuthal
scanning from 40 to 70 degree using 55 degree nominal angle,
Stainless steel screw receptacles provide a firm anchoring of probe to wedge
Wedges are available with irrigation, holes for mounting a scanners and carbide pins for wear resistance
Wedges are designed to perform manual or automated scans (scanners)
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.