Part No: A263-1 - AOD angle Wedge 2.375" (Dual Scan Wedge set) for A26 phased array probe
Part No: A263-1
AOD angle Wedge 2.375" (Dual Scan Wedge set) Tube ranger coverable 50.8mm(2") - 60.3mm(2.375")
Wedge (55deg) for A26 Dual Array Probes- Designed for azimuthal
scanning from 40 to 70 degree using 55deg nominal angle,
Stainless steel screw receptacles provide a firm anchoring of probe to wedge
Wedges are available with irrigation, holes for mounting a scanners and carbide pins for wear resistance
Wedges are designed to perform manual or automated scans (scanners)
Wedge (55deg) for A26 Dual Array Probes- Designed for azimuthal
scanning from 40 to 70 degree using 55deg nominal angle,
Stainless steel screw receptacles provide a firm anchoring of probe to wedge
Wedges are available with irrigation, holes for mounting a scanners and carbide pins for wear resistance
Wedges are designed to perform manual or automated scans (scanners)
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.